Call Us:   +1 (812) 346-5159  
rileygw@decaturplastics.com
:: Custom Injection Molding    (Thermoplastic) :: Flocking (Fiber Coating):: Assembly and Finishing:: Equipment List:: Quality Assurance:: The True Cost of Poor Quality :: Case Histories :: Product Listing

ISO/TS 16949:2009 Certified
WSO cert for DPPEcovadis Csr Rating

Directions


Directions from Indianapolis International Airport

Depart the airport heading east on I-70 to I-465 South.

Take I-465 South and then East to I-65.

Exit on I-65 South toward Louisville, KY.

Go 38 miles to exit 76B, Columbus, IN, and US Highway 31.

Take Highway 31 south through Columbus.

Go 13 miles to State Highway 7.

Turn Left on Highway 7 and go South toward North Vernon.

Decatur Plastics is approximately 13 miles on the left.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
- Injection Molding Division
- Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159Telephone
+1 (812) 346-5210 Facsimile

Back to top



Directions from Indianapolis, IN

Take Highway 31 south through Columbus.

Go 13 miles to State Highway 7.

Turn Left on Highway 7 and go South toward North Vernon.

Decatur Plastics is approximately 13 miles on the left.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
- Injection Molding Division
- Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159 Telephone
+1 (812) 346-5210 Facsimile

Back to top



Directions from Cincinnati International Airport

Exit airport via Kentucky State Highway 212.

Follow signs to I-275 West.

Take I-275 west to Exit 16, US Highway 50 West, toward Lawrenceburg/ Greendale/Aurora, IN, and turn left.

Then turn right onto US Highway 50 West.

Take US Highway 50 West into North Vernon, IN.

At the junction of US Highway 50 and State Highways 3 and 7, turn right.

Follow State Highways 3 and 7 through North Vernon approximately 3 miles to the junction where these highways split. Continue straight on Highway 7toward Columbus, IN.

From the split, Decatur Plastics is 1.7 miles north on the right side of Highway 7 at the top of the hill after a caution light.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
 - Injection Molding Division
 - Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159 Telephone
+1 (812) 346-5210 Facsimile

Back to top



Directions from Cincinnati, OH

Take US Highway 50 West into North Vernon, IN.

At the junction of US Highway 50 and State Highways 3 and 7, turn right.

Follow State Highways 3 and 7 through North Vernon approximately 3 miles to the junction where these highways split. Continue straight on Highway 7toward Columbus, IN.

From the split, Decatur Plastics is 1.7 miles north on the right side of Highway 7 at the top of the hill after a caution light.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
 - Injection Molding Division
 - Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159 Telephone
+1 (812) 346-5210 Facsimile

Back to top



Directions from Louisville International Airport

Exit airport and follow signs for I-264/Waterson Expressway. Take that ramp to I-65 North toward downtown Louisville and Indianapolis, IN.

Follow I-65 North Exit 50A, US Highway 50 and North Vernon, IN.

Follow US Highway 50 East to North Vernon.

At the junction of US Highway 50 and State Highways 3 and 7, turn left.

Follow Highways 3 and 7 through North Vernon approximately 3 miles to the junction where these highways split. Continue straight on Highway 7 north towards Columbus.

From the split, Decatur Plastics is 1.7 miles north on the right side of Highway 7 at the top of the hill after a caution light.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
 - Injection Molding Division
 - Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159 Telephone
+1 (812) 346-5210 Facsimile

Back to top



Directions from Louisville, KY

Follow I-65 North Exit 50A, US Highway 50 and North Vernon.

Follow US Highway 50 East to North Vernon.

At the junction of US Highway 50 and State Highways 3 7, turn left.

Follow Highways 3 and 7 through North Vernon approximately 3 miles to the junction where these highways split. Continue straight on Highway 7 north towards Columbus.

From the split, Decatur Plastics is 1.7 miles north on the right side of Highway 7 at the top of the hill after a caution light.

We are the large beige building with the brick front just beyond Decatur Mold.

There is a sign out front and one on the building.

Decatur Plastic Products
 - Injection Molding Division
 - Corporate Headquarters
3250 N State Highway 7
North Vernon, IN 47265 USA
+1 (812) 346-5159 Telephone
+1 (812) 346-5210 Facsimile

Back to top

Directions to North Vernon, IN, Flocking Facility

From the split of State Highways 7 and 3 travel 1.5 miles north on Highway 3.

Turn right onto County Road 350 North.

Go 7/10 of a mile to a 4-way intersection with County Road 75 West.

Turn right.

Drive 100 yards and turn left onto Montrow Parkway.

Decatur Plastic Products Flocking Division is the beige building on the right.

Decatur Plastic Products
- Indiana Flocking Division
655 W. Montrow Parkway
North Vernon, IN 47265
(812) 346-5159 Telephone
(812) 346-5210 Facsimile

Back to top

Decatur Plastic Products - Solutions Start Here
Decatur Platic Products, Inc.- High Quality Injection Molding